EDLC Module

EDLC Module

EDLC Module

Super capacitor module (EDLC Module)
It is formed by using a single super capacitor in series (increasing voltage), parallel (increasing capacity) or in series and parallel at the same time plus a protection circuit and packaging. The super capacitor module balance circuit is divided into active type and passive type, and the active type is either When the cell voltage reaches the protection point, the balance mechanism is performed, and the passive type is a forced voltage division by parallel balancing resistors.
The advantage of active balancing is that the continuous power consumption is low. The disadvantage is that the voltage difference between series is large. The advantage of passive balancing is that it maintains the voltage difference between cells but continues to consume large amounts of power. The supercapacitor module has long life, fast charge and discharge response, extremely Due to the advantages of low internal resistance, wide operating temperature, and instantaneous high current, the Dip-Sag Voltage Compensator (DVC) voltage sag compensation device is the most suitable material because of the instantaneous high current and fast discharge response of the supercapacitor module, which can compensate instantaneously. Voltage sag load power demand.

The electric pitch wind turbine system also needs to have strong instantaneous discharge capability and long life, which can avoid the cost of maintaining and providing kinetic energy power equipment and other losses.

Kaohsiung Light Rail is equipped with supercapacitor modules as energy storage power, which can be charged at each stop.

Servo motor drives used to use electrolytic capacitors for instantaneous kinetic energy compensation and motor back-EMF kinetic energy recovery. In recent years, the use of super capacitor modules has better results and lower costs.

Features - Auxiliary power output, voltage stabilization, used in emergency backup power, wind power, automotive boost and other purposes, standard module voltage range DC16V~DC160V, current output 100A~1900A, customized modules can be connected in parallel with lithium batteries for automatic detection Measure the voltage on both sides, built-in DC/DC current limiting balance voltage regulation circuit, automatic power off when no operation, configure the screen voltage and current and other information at a glance.

The monomer has passed the safety certification, the ultra-long cycle life of more than 1 million times, and the best life cost material.

Website 


Website 


To learn more, please contact us

02-29996599

Email:service@pactw.com.tw

Back